Concrete
Slab volume
For patios, floors, pads, sidewalks, and other rectangular slabs. The planning amount adds 10% and rounds up to the next quarter-yard.
ft
ft
in
Calculated volume4.94cubic yards
Planning amount + 10%5.50cubic yards, rounded up
Project planning tools
Concrete, gravel, and asphalt material calculators.
Use these calculators to develop a starting quantity for concrete, aggregate, asphalt, Novum Wall, or Element ICF materials. Then talk through the site, product, mix, and delivery plan with Treasure State Concrete, Inc.
Seven practical estimators
Start with the shape of your project.
Enter the finished dimensions—not bag counts or truckloads. Each result updates as you type and keeps the units visible.
Concrete
Continuous footings
For straight rectangular footing runs. Use quantity for repeated runs with the same dimensions.
ft
in
in
qty
Calculated volume1.32cubic yards
Equivalent volume35.56cubic feet
Concrete
Cylindrical piers
For round piers, post holes, or caissons with a consistent diameter and depth.
in
ft
qty
Calculated volume0.47cubic yards
Equivalent volume12.57cubic feet
Aggregate
Rectangular area
Estimate loose aggregate for a rectangular area. Material weight varies with product, moisture, gradation, and compaction, so the tons-per-yard factor is editable.
ft
ft
in
tons/yd³
Calculated volume7.41cubic yards
Estimated weight10.37tons
Asphalt
Rectangular area
Estimate compacted asphalt tonnage for a rectangular section. Mix density varies; adjust the default 145 lb/ft³ only when you have a project-specific value.
ft
ft
in
lb/ft³
Estimated weight72.50tons
Surface area4,000.00square feet
Novum Wall
Standard block planning
Estimate full standard retaining blocks for a straight wall face. The default 46⅛-inch length and 9-inch course height come from Novum Wall's current standard retaining block data. Edit them when your selected units differ.
Check the official block drawings first
Download Novum Wall block dimensions (PDF) The standard calculator defaults are a 46⅛-inch face length and a 9-inch course height. The manufacturer PDF also shows half, top, corner, cap, and freestanding units.
ft
ft
in
in
%
Planning standard blocks70includes 5.00% allowance
Layout before allowance666 courses × 11 blocks
Planning estimate only.
This is a rough count of full standard face units. It does not include half, corner, top, cap, freestanding, step, or curve units; base and drainage materials; grade changes; setback; reinforcement; or an engineered layout. Confirm the current product list and project design before ordering.
Element ICF
Forms and concrete planning
Estimate standard Element ICF forms and their concrete volume from net wall area. Current standard forms are 48 × 16 inches, or 5.33 square feet. Concrete volume varies by core, so the per-form value stays editable.
Check the official estimating guide first
Download Element ICF estimating guide (PDF) Standard forms are 48 × 16 inches, or 5.33 square feet. Use the concrete-volume table to match the selected 4-, 6-, 8-, 10-, or 12-inch core before changing the per-form value.
ft
ft
ft²
in
in
yd³/form
%
Planning standard forms126includes 5.00% allowance
Planning concrete12.60cubic yards · 640.00 net ft²
Planning estimate only.
Official site-assembled standard-block concrete-volume references are 0.07 yd³ for a 4-inch core, 0.10 for 6 inches, 0.13 for 8 inches, 0.16 for 10 inches, and 0.20 for 12 inches. Change the value above to match the selected product. The estimate excludes corners, bucks, brick-ledge and taper units, height adjusters, cuts, bracing, rebar, penetrations, and project-specific waste or displacement.
Before you schedule
Let dispatch confirm the real-world details.
Have your dimensions, project location, placement date, access conditions, and calculated estimate ready. These calculations do not create or confirm an order.
Call Treasure State Concrete, Inc.Request a quoteOpen contractor bid tools